- Fix an internal corner profile (a) into one of the corners.
Apply beads of Wetwall Silicone Sealant into both the channels of the profile.
- Remove the protective film from the face of the panel.
- If end cap profiles are required, they must be fitted to the exposed edge of the panel
prior to fixing.
- Apply a bead of Wetwall Silicone Sealant into a channel of the profile.
- Apply a generous amount of Wetwall Adhesive to the back of the first side panel (b)
then insert into the corner profile (a) ensuring there is a 2mm clearance at the bottom
and fix the panel firmly to the wall.
- Apply a bead of Wetwall Silicone Sealant into the other internal corner profile (c)
and fix to the edge of the back panel (d). Apply a generous amount of Wetwall
Adhesive to the back of the panel.
- Insert the exposed edge of the back panel into the remaining channel (a) of the first
profile and swing the panel into place against the back wall.
- Apply a bead of Wetwall Silicone Sealant into the remaining channel (c) and fix the
second wall panel (e).
