How it works
Wetwall panels can be fitted over most existing surfaces, including tiles. Wetwall panels are easy to install, using standard DIY tools. The following pages provide a step by step guide to fitting your panels. However, if you require any further assistance, please contact our helpline direct on 01738 494989.
Specification
Wetwall panels are constructed of Medite Exterior Grade MDF, covered on the face with high pressure laminate and balancing laminate to the back of the panel. Our waterproof gluelines are D4 rated. Wetwall panels come with a 10 year guarantee **
The shower panels are produced with a square edged finish as standard but a tongue and grooved panel is available where larger wall areas are to be covered.
** The 10 Year manufacturers' guarantee refers only to manufacturing defects.| type | width | edge detail | length | thickness |
|---|---|---|---|---|
| Shower Panel | 1200mm | square edged | 2420mm | 11mm |
| Shower Panel | 900mm | square edged | 2420mm | 11mm |
| Wall Panel | 590mm | tongue & grooved | 2420mm | 11mm |
| Bath Wall | 900mm | square edged | 2100mm | 11mm |
| Vanity Surface | 370mm | bullnosed | 2420mm | 27mm |
- Venetian Mosaic, Azzuro, Sicilian Slate Tile and Alumo are unavailable as Tongue & Grooved panels. Venetian Mosaic, Azzuro and Sicilian Slate Tile may need to be cut on site prior to installation to ensure that adjacent panels line up correctly.
- Due to the inherent properties of Alumo, this design could be more prone to scratching and marking during installation and use. Extra care must therefore be taken when using this design.